

 PCMCIA NE2000 Lan Card installation guide for Windows NT 4.0
==============================================================

Introduction:
-------------
This document describes the procedure to install Windows NT v4.0 driver
for PCMCIA NE2000 Lan Card .

   Location of Driver:     \WINNT40\PCMND.SYS

It is not necessary to install enabler software (either a Card Enabler or
Card and Socket Services ) when installing a PCMCIA Ethernet Lan Card
under Windows NT 4.0.This driver will directly configure the PCMCIA  Eth-
ernet Card for the Intel 82365SL and other PCMCIA controllers compatible
with it.


Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------

   When you are in Windows NT4.0

   1. In the Main group of NT, select the [Control Panel] icon.

   2. In the Control Panel window, choose the [Network] icon.

   3. In the Network Settings dialog box, choose the [Adapter] button.
      And then choose [Add] button .The Add Network Adapter dialog box
      appears.

   4. When asked for the name of the network card, select
      [Have Disk] button.

   5. Insert this driver diskette into drive A,and type the path of NT4.0
      driver --> A:\WINNT40

   6. Select the [PCMCIA NE2000 Lan Card] then press <Enter>.

   7. You need to specify the IRQ No.,I/O port address,Memory Location and
      Socket number.

   8. NT will then perform the binding process.  If any additional network
      software options were installed,  you may be  prompted for  specific
      information for these packages.

   9. Restarting your system you will acquire network service.
------------------------------- END OF README.TXT ------------------------
