

PCMCIA NE2000 Lan Card installation guide for Windows NT 3.51
=============================================================


Introduction:
=============

  This document shows you how to setup the driver and how to use the enh-
  anced functions by setting the custom keywords.

               Location of Driver:     \WINNT351\PCMND.SYS

Contents of the Subdirectory:
=============================

    PCMND.SYS           The NDIS3 driver for Windows NT.
    OEMSETUP.INF        The setup information file.
    README.TXT          This file.


Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured.

    1. Open "Control Panel" -> "Networks", and choose the "Add Adapter"
       button. The Add Noetwork Adapter dialog box appears. Select "<other>
       Requires disk from manufacturer" in the list of Network Adapters,
       and then press <Enter>.

    2. Insert the driver diskette into your floppy drive, and specify the
       path of the driver in the diskette(i.e. A:\WINNT351) if necessary.

    3. Select "PCMCIA NE2000 Lan Card", and start to copy the
       driver files to your system.

    4. You need to specify the IRQ No.,I/O port address,Memory Location and
       Socket number.

    5. After all the driver files have been copied to your system, a prop-
       erty dialog box appears in the screen. You can enable the special
       properties if you want to.

    6. When the driver installation is completed, restart your PC.

-------------------------------- END OF FILE ------------------------------

