Installing the PCMCIA NE2000 Ethernet driver under Artisoft LANtastic 6.x
=========================================================================
The NDIS 2.0 driver currently is supported for LANtastic version 6.x only.

1. Run the LANtastic INSTALL program to install LANtastic and answer all
   questions.

   1. Under [ Select Network Adapter ] diaglogue box, select
      [ NDIS Support for Network Adapters ].

   2. Insert this PCMCIA NE2000 Driver diskette into drive A.

   3. Under the [ Enter NDIS driver directory ] diaglogue box, type
      "A:\LANTASTI"

2. After installation completes , you should modify the  PROTOCOL.INI file
   file to specify the INTERRUPT number and the IOBASE number , which must
   be  equal to  the /irq and /io parameters specified to the Card enabler
   program or client driver.

3. To start up the network, execute the STARTNET.BAT batch file.
